Show simple item record

dc.contributor.advisor Jump, J. Robert
dc.creatorWaites, Nigel Derek
dc.date.accessioned 2018-11-26T17:15:10Z
dc.date.available 2018-11-26T17:15:10Z
dc.date.issued 1988
dc.identifier.citation Waites, Nigel Derek. "A microprocessor system designed for use in the laboratory." (1988) Master’s Thesis, Rice University. https://hdl.handle.net/1911/103402.
dc.identifier.urihttps://hdl.handle.net/1911/103402
dc.description.abstract The goal of the project was to design a low cost microprocessor system for laboratory use. A general purpose microprocessor board was conceived that could be used in a card type system or with the special purpose mother board, which would give the microprocessor board protection from the students, and which would conveniently distribute signals through breadboard terminals for connection to external circuitry. This thesis focuses on the development of the system, both in terms of hardware and software. The project's goals have all been achieved; forty microprocessor systems were built, and they are presently being used in the laboratory. The bundled hardware and software package gives the user access to the equivalent of a small development system that provides a user-friendly environment, at a fraction of the cost of any commercially available development system.
dc.format.extent 107 pp
dc.language.iso eng
dc.subjectElectrical engineering
Applied sciences
dc.title A microprocessor system designed for use in the laboratory
dc.identifier.digital RICE2392
dc.type.genre Thesis
dc.type.material Text
thesis.degree.department Electrical Engineering
thesis.degree.discipline Engineering
thesis.degree.grantor Rice University
thesis.degree.level Masters
thesis.degree.name Master of Science
dc.format.digitalOrigin reformatted digital
dc.identifier.callno THESIS E.E. 1988 WAITES


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record