Browse this collection by:
-
C. Sengupta, J. R. Cavallaro and B. Aazhang, "On Multipath Channel Estimation for CDMA Systems Using Multiple Sensors," IEEE Transactions on Communications, vol. 49, no. 3, pp. 543-553, 2001.
-
S. Das, S. Rajagopal, C. Sengupta and J. R. Cavallaro,"Arithmetic Acceleration Techniques for Wireless Communication Receivers," in Asilomar Conference on Signals, Systems, and Computers,, pp. 1469 - 1474.
-
C. Sengupta, S. Das, J. R. Cavallaro and B. Aazhang, "Efficient Multiuser Receivers for CDMA Systems," Wireless Communication and Networking Conference, pp. 1459-1463, 1999.
-
C. Sengupta, S. Das, J. R. Cavallaro and B. Aazhang,"Joint Multiuser Channel Estimation and Detection for CDMA Systems," in IEEE Information Theory Workshop on Detection, Estimation, Classification and Imaging (DECI),
-
C. Sengupta, "Algorithms and Architectures for Channel Estimation in Wireless CDMA Communication Systems," Ph.D. Thesis, 1998.
-
C. Sengupta, J. R. Cavallaro and B. Aazhang, "Subspace-based Tracking of Multipath Channel Parameters for CDMA Systems," European Transactions on Telecommunications (ETT), vol. 9, no. 5, pp. 439-447, 1998.
-
C. Sengupta, J. R. Cavallaro and B. Aazhang,"Maximum Likelihood Multipath Channel Parameter Estimation in CDMA Systems Using Antenna Arrays," in IEEE International Symposium on Personal, Indoor, and Mobile Radio Communications (PIMRC),
-
S. Das, C. Sengupta and J. R. Cavallaro,"Hardware design issues for a mobile unit for next generation CDMA systems," in Conference on Advanced Signal Processing Algorightms, Architectures, and Implementations,
-
C. Sengupta, S. Das, J. R. Cavallaro and B. Aazhang,"Fixed Point Error Analysis Of Multiuser Detection and Synchronization Algorithms For CDMA Communication Systems," in IEEE International Conference on Acoustics, Speech, and Signal Processing (ICASSP),, pp. 3249-3252.
-
C. Sengupta, A. Hottinen, J. R. Cavallaro and B. Aazhang,"Maximum Likelihood Multipath Channel Parameter Estimation in CDMA Systems," in Conference on Information Sciences and Systems, 1998
-
C. Sengupta, J. R. Cavallaro, W. L. Wilson and F. K. Tittel, "Automated Evaluation of Critical Features in VLSI Layouts Based on Photolithographic Simulations," IEEE Transactions on Semiconductor Manufacturing, vol. 10, no. 4, pp. 482-494, 1997.
-
C. Sengupta, J. R. Cavallaro and B. Aazhang,"Tracking Fading Multipath Channel Parameters, in CDMA Systems, Using a Subspace-based Method - An Implementation Perspective," in IEEE International Symposium on Personal, Indoor, and Mobile Radio Communications (PIMRC),, pp. 734-739.
-
C. Sengupta, J. R. Cavallaro and B. Aazhang,"Solving the SVD updating problem for subspace tracking on a fixed sized linear array of processors," in IEEE International Conference on Acoustics, Speech, and Signal Processing (ICASSP),, pp. 4137-4140.
-
C. Sengupta, K. Kota and J. R. Cavallaro,"Parallel algorithms and architectures for subspace based channel estimation for CDMA communication systems," in Conference on Advanced Signal Processing Algorightms, Architectures, and Implementations,, pp. 412-423.
-
C. Sengupta, M. Erdelyi, Z. Bor, J. R. Cavallaro, M. C. Smayling, G. Szabo, F. K. Tittel and W. L. Wilson,"An Integrated CAD Framework Linking VLSI Layout Editors and Process Simulators," in SPIE Conference on Optical Microlithography IX, 1996, pp. 244-252.
-
J. R. Cavallaro, C. Sengupta, F. K. Tittel and W. L. J. Wilson,"Automated Evaluation of Critical Features in VLSI Layouts Based on Photolithographic Simulations," in NSF Design and Manufacturing Grantees Conference, 1996, pp. 345-346.
-
M. Erdelyi, Z. Bor, J. R. Cavallaro, G. Szabo, W. L. Wilson, C. Sengupta, M. C. Smayling and F. K. Tittel, "Enhanced Microlithography Using Combined Phase Shifting and Off-axis Illumination," Japanese Journal of Applied Physics, vol. 34, no. 12A, pp. L1629-L1631, 1995.
-
F. K. Tittel, M. Erdelyi, C. Sengupta, Z. Bor, G. Szabo, J. R. Cavallaro, M. C. Smayling and W. L. Wilson,"Ultrahigh Resolution Lithography with Excimer Lasers," in NATO Workshop on Gas Lasers - Recent Developments and Future Prospects, 1995, pp. 263-272.
-
C. Sengupta, "An Integrated CAD Framework Linking VLSI Layout Editors and Process Simulators," Masters Thesis, pp. 102, 1995.
-
Z. Bor, J. R. Cavallaro, M. Erdelyi, M. Kido, C. Sengupta, M. Smayling, G. Szabo, F. Tittel and W. Wilson,"A New Phase Shifting Technique for Deep UV Excimer Laser Based Lithography," in SPIE Conference on Photonics West, 1995, pp. 195-202.
-
M. Erdelyi, C. Sengupta, Z. Bor, J. R. Cavallaro, M. Kido, M. C. Smayling, F. K. Tittel, W. L. Wilson and G. Szabo,"A New Interferometric Phase-Shifting Technique for Sub-half-micron Laser Microlithography," in SPIE Conference on Optical/Laser Microlithography VIII, 1995, pp. 827-837.
C. Sengupta, J. R. Cavallaro and B. Aazhang, "On Multipath Channel Estimation for CDMA Systems Using Multiple Sensors," IEEE Transactions on Communications, vol. 49, no. 3, pp. 543-553, 2001.
S. Das, S. Rajagopal, C. Sengupta and J. R. Cavallaro,"Arithmetic Acceleration Techniques for Wireless Communication Receivers," in Asilomar Conference on Signals, Systems, and Computers,, pp. 1469 - 1474.
C. Sengupta, S. Das, J. R. Cavallaro and B. Aazhang, "Efficient Multiuser Receivers for CDMA Systems," Wireless Communication and Networking Conference, pp. 1459-1463, 1999.
C. Sengupta, S. Das, J. R. Cavallaro and B. Aazhang,"Joint Multiuser Channel Estimation and Detection for CDMA Systems," in IEEE Information Theory Workshop on Detection, Estimation, Classification and Imaging (DECI),
C. Sengupta, "Algorithms and Architectures for Channel Estimation in Wireless CDMA Communication Systems," Ph.D. Thesis, 1998.
C. Sengupta, J. R. Cavallaro and B. Aazhang, "Subspace-based Tracking of Multipath Channel Parameters for CDMA Systems," European Transactions on Telecommunications (ETT), vol. 9, no. 5, pp. 439-447, 1998.
C. Sengupta, J. R. Cavallaro and B. Aazhang,"Maximum Likelihood Multipath Channel Parameter Estimation in CDMA Systems Using Antenna Arrays," in IEEE International Symposium on Personal, Indoor, and Mobile Radio Communications (PIMRC),
S. Das, C. Sengupta and J. R. Cavallaro,"Hardware design issues for a mobile unit for next generation CDMA systems," in Conference on Advanced Signal Processing Algorightms, Architectures, and Implementations,
C. Sengupta, S. Das, J. R. Cavallaro and B. Aazhang,"Fixed Point Error Analysis Of Multiuser Detection and Synchronization Algorithms For CDMA Communication Systems," in IEEE International Conference on Acoustics, Speech, and Signal Processing (ICASSP),, pp. 3249-3252.
C. Sengupta, A. Hottinen, J. R. Cavallaro and B. Aazhang,"Maximum Likelihood Multipath Channel Parameter Estimation in CDMA Systems," in Conference on Information Sciences and Systems, 1998
C. Sengupta, J. R. Cavallaro, W. L. Wilson and F. K. Tittel, "Automated Evaluation of Critical Features in VLSI Layouts Based on Photolithographic Simulations," IEEE Transactions on Semiconductor Manufacturing, vol. 10, no. 4, pp. 482-494, 1997.
C. Sengupta, J. R. Cavallaro and B. Aazhang,"Tracking Fading Multipath Channel Parameters, in CDMA Systems, Using a Subspace-based Method - An Implementation Perspective," in IEEE International Symposium on Personal, Indoor, and Mobile Radio Communications (PIMRC),, pp. 734-739.
Solving the SVD updating problem for subspace tracking on a fixed sized linear array of processorsC. Sengupta, J. R. Cavallaro and B. Aazhang,"Solving the SVD updating problem for subspace tracking on a fixed sized linear array of processors," in IEEE International Conference on Acoustics, Speech, and Signal Processing (ICASSP),, pp. 4137-4140.
C. Sengupta, K. Kota and J. R. Cavallaro,"Parallel algorithms and architectures for subspace based channel estimation for CDMA communication systems," in Conference on Advanced Signal Processing Algorightms, Architectures, and Implementations,, pp. 412-423.
C. Sengupta, M. Erdelyi, Z. Bor, J. R. Cavallaro, M. C. Smayling, G. Szabo, F. K. Tittel and W. L. Wilson,"An Integrated CAD Framework Linking VLSI Layout Editors and Process Simulators," in SPIE Conference on Optical Microlithography IX, 1996, pp. 244-252.
J. R. Cavallaro, C. Sengupta, F. K. Tittel and W. L. J. Wilson,"Automated Evaluation of Critical Features in VLSI Layouts Based on Photolithographic Simulations," in NSF Design and Manufacturing Grantees Conference, 1996, pp. 345-346.
M. Erdelyi, Z. Bor, J. R. Cavallaro, G. Szabo, W. L. Wilson, C. Sengupta, M. C. Smayling and F. K. Tittel, "Enhanced Microlithography Using Combined Phase Shifting and Off-axis Illumination," Japanese Journal of Applied Physics, vol. 34, no. 12A, pp. L1629-L1631, 1995.
F. K. Tittel, M. Erdelyi, C. Sengupta, Z. Bor, G. Szabo, J. R. Cavallaro, M. C. Smayling and W. L. Wilson,"Ultrahigh Resolution Lithography with Excimer Lasers," in NATO Workshop on Gas Lasers - Recent Developments and Future Prospects, 1995, pp. 263-272.
C. Sengupta, "An Integrated CAD Framework Linking VLSI Layout Editors and Process Simulators," Masters Thesis, pp. 102, 1995.
Z. Bor, J. R. Cavallaro, M. Erdelyi, M. Kido, C. Sengupta, M. Smayling, G. Szabo, F. Tittel and W. Wilson,"A New Phase Shifting Technique for Deep UV Excimer Laser Based Lithography," in SPIE Conference on Photonics West, 1995, pp. 195-202.
M. Erdelyi, C. Sengupta, Z. Bor, J. R. Cavallaro, M. Kido, M. C. Smayling, F. K. Tittel, W. L. Wilson and G. Szabo,"A New Interferometric Phase-Shifting Technique for Sub-half-micron Laser Microlithography," in SPIE Conference on Optical/Laser Microlithography VIII, 1995, pp. 827-837.